Cost: WaterUps® cells are over 30% cheaper than scoria/river sand; Installation: WaterUps® cells are easier and quicker to install; Weight: WaterUps® cells weigh approx. 5kgs per square metre [...]
The holes are designed to allow water to drain through but prevent soil particles from doing so. To bind the soil and help prevent dry particles of soil failing through the holes in the top of [...]
The holes are designed to allow water to drain into the water reservoir so that the soil does not get waterlogged. This is particularly important in cases of heavy rain.
WaterUps® cells are manufactured in Australia in western Sydney.
All the PVC raw material used in the manufacture of WaterUps® cells is sourced from recycled plastic. Our philosophy is that if we need to bury plastic underground then let’s make it useful!
You will likely need the following: A PVC / PP suitable, strong adhesive waterproof glue – to seal the inlet pipe and overflow pipes; 22mm Hole Saw or speed bore – to drill the hole for the [...]
We're not around right now. But you can send us an email and we'll get back to you, asap.
Start typing and press Enter to search